TPU Plastic Machinery Parts Raw Materials, Shoes Plastic TPU

Basic Info

Model NO.	TPU-8
The Density of	1.005
The Refractive Index	1.44
Psa	56.11000
Logp	0.57930
Melting Point	250-255ºC
The Boiling Point	136.3°c at 760 Mmhg
Einecs No.	607-507-1
Transport Package	25kg/Bag
Specification	25KGS
Origin	China
HS Code	3909500000
Production Capacity	5000mt/Year

Product Description

TPU:
Thermoplastic polyurethanes elastomer

TPU is a mature environmental protection material with excellent properties of high tension, high tensile force, toughness and aging resistance. At present, TPU has been widely used in medical and health, electronics and electrical appliances, industry and sports, etc. It has incomparable properties of high strength, good toughness, wear resistance, cold resistance, oil resistance, water resistance, aging resistance, weather resistance and so on. At the same time, it has high water resistance and moisture permeability, wind resistance, cold resistance, antibacterial, mildew resistance, warmth, uv resistance and energy release and many other excellent functions.

Product Parameters:

Physical properties of	Rating	Unit	The test method
Volume flow rate of solution
200ºC,5kg	3.2	cm³/10min	ISO 1133
The density of	1.04	g/cm³	ISO 1183
Bibulous rate	<0.1	%	ISO 62
Mechanical properties of	Rating	Unit	The test method
Tensile stress
yield	53	MPa	ISO 527
Tensile strain
The fracture	3	%	ISO 527
The tensile modulus	3300	MPa	ISO 527
Bending modulus	102	MPa	ISO 178
Rockwell hardness
L level	100		ASTM D785
Impact properties	Rating	Unit	The test method
Non-notched impact strength of simply supported beams	17	KJ/m²	ISO 179/1eU
Notched impact strength of simply supported beam	3	KJ/m²	ISO 179/1eA
Unnotched impact strength of cantilever beam	11	KJ/m²	ISO 180
Thermal performance	Rating	Unit	The test method
VEKA softening temperature
B/503,50N,50ºC/h	101	ºC	ISO 306
Thermal deformation temperature
0.45MPa	96	ºC	ISO 75
Flame retardant performance	Rating	Unit	The test method
Flame retardant grade	HB		UL 94
Electrical properties	Rating	Unit	The test method
Volume resistivity	>1014	ohms cm	IEC 60093

Molding product use:

Auto parts Ball coupling; Dust cover. Pedal brake; Door lock firing pin; Bushing plate spring bushing; Bearing; Shockproof parts; Internal and external decorative pieces; Chain etc. Machinery and industrial components Various gears; The seals; Shockproof parts; Modulus needle; Bushing; bearing Cover classes; The connector. Rubber sieve; Printing cots, etc The footwear Softball shoes, baseball shoes, golf shoes, football shoes sole and shoe front Ladies heel; Ski boots. Safety shoes etc. other Since the wheel; The handle; Strap; Mobile phone case; The following; Tablet case, etc Pipe · Hose High pressure pipe; Medical tube; Hydraulic pipe; Pneumatic tube; The fuel pipe; Coated pipe Duct; Fire hose, etc. Film · plate Turn the belt; Air cushion; Diaphragm; The keyboard board; Compound cloth, etc. Wire · cable Power communication cable; Computer wiring; Automobile wiring; Exploration cable, etc other Various annular pipelines; Circular; "V" belt; Synchronous belt; Non-slip belt etc. Pressure delay Turn the belt; Software tank, tank; Film composite sheet, etc Blow molding All kinds ofvehicle boxes; Various container classes Blown film Ultra thin, wide film (medical, sanitary articles

Packing and transportation:

1.Packing:25kg/ carton or 25kg/bag, or per your requirement.18mt/20'FCL2.Storage:The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.3.Transportation:During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.